Pisos.com Scraper

Pisos.com Scraper: Spanish property listings for sale and to rent, with price per m²

Give it a Spanish province or town, or paste a pisos.com search, and you get one row per listing: asking price or monthly rent, price per m², built area, rooms, bathrooms, floor, neighbourhood, coordinates, the agency and its phone number. Turn on the detail pages and each row also gets the full feature list, the whole description, every photo and the agency's own reference. The catch is depth: pisos.com never serves past page 100 of a search, so one search stops at 3,000 listings however many it advertises, and a bigger area has to be split by province or price band.

🔍 What Pisos.com Scraper does

It reads the same logged-out results pages a visitor sees, 30 listings a page, and builds each row from the listing card. Price, size, rooms and coordinates all come from there. With includeDetails on, it also opens each listing's own page.

pisos.com spells some places its own way. elche is a 404 and elche_elx is the real page. The usual spellings are mapped for you, so elche, Elx, San Sebastián, La Coruña, Palma and Vitoria all land in the right place. A name it does not recognise gives you a free LOCATION_NOT_FOUND row, and the fix is always the same: open the search on pisos.com and paste the address into startUrls.

The site also ignores a filter it does not understand, and answers with the unfiltered set as if nothing were wrong. So when you set a price bound with location, the run first compares the result count with the unfiltered count. If they match, the filter was dropped, and you get a free FILTER_IGNORED row instead of listings you never asked for.

Past the last page, pisos.com hands back page 1 again. The run notices the repeat and stops rather than charging you twice for the same flats.

When a search has only a handful of matches, pisos.com can fill the rest of the page with other listings it thinks you might like. Those are not part of your search, so they are skipped and never charged.

📥 What you give it

{
  "location": "madrid",
  "operation": "venta",
  "propertyType": "pisos",
  "minPrice": 200000,
  "maxPrice": 300000,
  "sortBy": "newest",
  "maxItems": 200
}

📤 What you get back

A real row from a real run, with the description snippet cut short:

{
  "listingId": "61748204239.106400",
  "url": "https://www.pisos.com/comprar/duplex-las_retamas_prado_santo_domingo_ensanche_sur28922-61748204239_106400/",
  "title": "Dúplex en calle de Juan Ramón Jiménez, 4",
  "operation": "venta",
  "propertyType": "duplex",
  "price": 450000,
  "priceCurrency": "EUR",
  "pricePerM2": 4091,
  "areaM2": 110,
  "rooms": 3,
  "bathrooms": 3,
  "floor": "2ª planta",
  "neighbourhood": "Las Retamas-Prado Santo Domingo-Ensanche Sur",
  "district": null,
  "municipality": "Alcorcón",
  "province": "Madrid",
  "country": "ES",
  "latitude": 40.3397,
  "longitude": -3.8323,
  "advertiserType": "professional",
  "advertiserName": "Inmobiliaria Maqueda",
  "advertiserUrl": "https://www.pisos.com/inmobiliaria-inmobiliaria_maqueda_993744_0/",
  "phone": "919387329",
  "isNewDevelopment": false,
  "imageCount": 43,
  "imageUrl": "https://fotos.imghs.net/mm-wp/1064/390/1064_IJ364-99380390_1_202602190946518929476.jpg",
  "images": [
    "https://fotos.imghs.net/mm-wp/1064/390/1064_IJ364-99380390_1_202602190946518929476.jpg",
    "https://fotos.imghs.net/mm-wp/1064/390/1064_IJ364-99380390_2_202602190946518929767.jpg"
  ],
  "descriptionSnippet": "¡Sin comisiones al comprador! Inmobiliaria maqueda presenta este ático dúplex en venta en prado santo domingo...",
  "description": null,
  "features": null,
  "reference": null,
  "lastUpdated": null,
  "searchUrl": "https://www.pisos.com/venta/pisos-madrid/",
  "page": 1,
  "position": 2,
  "scrapedAt": "2026-09-29T13:27:49.166Z"
}

How often each field is filled, measured over 305 listings from ten searches in September 2026:

floor and district are low because plenty of homes have neither. A detached house has no floor, and most Spanish towns have no districts.

🧾 Reading the output

Real listings carry no charged field at all, so drop every row where charged is false and you are left with the listings.

▶️ How to run it

1. Open Pisos.com Scraper and click Try for free. 2. Type a province or town into Where, then pick Sale or rent and a Property type. To use a search you set up on pisos.com, paste its address into Search URLs instead. 3. Set Maximum listings. The form starts at 50. 4. Tick Include full detail pages if you want the description, every photo and the feature list. 5. Click Start, then export the dataset as CSV, JSON or Excel.

💰 How much does it cost?

$1.85 per 1,000 listings, flat on every Apify plan, with the detail pages or without.

Not charged: the sample row, every diagnostic row, a listing above your maxPrice, and a listing already delivered earlier in the same run. maxItems is a hard stop, so 200 means at most 200 listings are charged. A pasted single listing costs the same as any other. If its page shows none of the price, size or location, you get a free FETCH_FAILED row for it instead.

💡 What people use it for

• Comparables before an offer: the asking price per m² of every flat in the same neighbourhood.
• Rent against buy for one town, from a sale run and a rental run with the same filters.
• A daily newest run with a small maxItems, to see what came on the market overnight in one area.
• Feeding an agency CRM or a market report with the agency, phone and link for each listing.

🚧 What it does not do

• Past page 100. One search stops at 3,000 listings. Split by province or price band to go wider.
• Sold prices. pisos.com publishes asking prices only, and asking prices are what you get.
• Energy ratings, floor plans or price history. None of them is on the logged-out page.
• Private sellers, mostly. The site is fed by agencies. If private sellers are what you are after, this is the wrong portal.
• Place names on a pasted single listing. A listing URL on its own gives the price, size, rooms, map point, description, features and photos, but leaves the neighbourhood, district, town, province, advertiser type and agency link empty. Search results fill those in, so paste a search when you need them.
• The ignored-filter check on pasted searches. It runs only when you use location with a price bound.

🧭 Which Spanish property scraper do you need?

❓ Questions people ask

Do I need a pisos.com account or an API key? No. It reads the public pages anyone can open.

Can I get every listing in Spain? Not in one search. Run province by province, or split by price band, and you can cover far more.

How do I find the right place name? Type it the way you would say it. If it does not resolve, search on pisos.com and paste the URL into startUrls, since the site's own address always works.

Can I filter on a garage or a terrace? Yes, through startUrls. Set the filter up on pisos.com and paste the address.

How current is the data? It is read live when the run starts. With includeDetails, lastUpdated tells you when the advertiser last touched the listing.

Can I run it on a schedule? Yes. sortBy: "newest" with a modest maxItems makes a cheap daily check of what is new in an area.

🆘 If something breaks

Open the Issues tab on the actor page. Include the run ID and the input you used, or the search URL.