DexScreener Pair Price & Liquidity Scraper

DexScreener Pair Price & Liquidity Scraper: DEX pairs by symbol, token or pool address

Search by symbol, paste token addresses or paste pool addresses, and you get one row per trading pair: the price in USD and in the quote token, the pool's liquidity, volume and price change from five minutes to 24 hours, and the buy and sell counts. Every row also says when DexScreener produced those figures. The catch is the ceiling: one search or token returns at most 30 pairs, there is no second page, and a broad symbol gives you the top of the list rather than every pool.

🔍 What DexScreener Pair Price & Liquidity Scraper does

Three ways in, and one run can mix them across chains:

• Search terms. A symbol, a name, a pair like SOL/USDC, or a contract address. Search is

fuzzy. On 30 September a SOL/USDC search capped at five rows returned the real SOL/USDC pool on Base next to tokens called SOLANGELES, SOLO and PLAY. When you know what you want, use addresses.

• Token addresses. By default the deepest pool for each token, one row each. Turn on

allPoolsPerToken for every pool the token trades in, up to 30.

• Pool addresses. Exactly that pool. The address that comes back is checked against the one you

asked for, and a mismatch is dropped, not charged.

A pool that two of your targets both find comes back once.

DexScreener's figures can already be up to a minute old when the run reads them. So every row carries snapshotAt, the moment DexScreener produced the numbers, and sourceAgeSeconds, how old they were when read. Read those before you trust a price.

If the first 25 targets all come back empty and nothing has been delivered, the run stops there rather than grinding through the rest. That is nearly always a list of addresses on the wrong chain.

📥 What you give it

{
  "searchTerms": ["SOL/USDC", "PEPE"],
  "tokenAddresses": ["solana:So11111111111111111111111111111111111111112"],
  "pairAddresses": ["base:0x1131DB5977242a03eBeaD1aCD18F80A9A29e5922"],
  "minLiquidityUsd": 10000,
  "maxItems": 50
}

All four of these mean the same address:

solana:So11111111111111111111111111111111111111112
solana/So11111111111111111111111111111111111111112
https://dexscreener.com/solana/So11111111111111111111111111111111111111112
So11111111111111111111111111111111111111112        (with chainId set to "solana")

📤 What you get back

A real row from a real run on 30 September 2026:

{
  "ok": true,
  "charged": true,
  "recordType": "pair",
  "query": "SOL/USDC",
  "chainId": "base",
  "dexId": "aerodrome",
  "baseSymbol": "SOL",
  "quoteSymbol": "USDC",
  "priceUsd": 119.55,
  "liquidityUsd": 713289.14,
  "volumeH24": 7372325.26,
  "priceChangeH24": 2.46,
  "marketCapUsd": 28813210,
  "snapshotAt": "2026-09-30T02:24:25.000Z",
  "sourceAgeSeconds": 47,
  "pairUrl": "https://dexscreener.com/base/0x1131db5977242a03ebead1acd18f80a9a29e5922",
  "pairAddress": "0x1131DB5977242a03eBeaD1aCD18F80A9A29e5922",
  "baseAddress": "0x311935Cd80B76769bF2ecC9D8Ab7635b2139cf82",
  "quoteAddress": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
  "priceNative": 119.5566,
  "liquidityBase": 2171.1728,
  "liquidityQuote": 453710,
  "fdvUsd": 28813210,
  "volumeH6": 1534194.95,
  "volumeH1": 379441.31,
  "volumeM5": 29220.53,
  "priceChangeH6": 0.49,
  "priceChangeH1": 0.05,
  "priceChangeM5": 0.05,
  "buysH24": 5902,
  "sellsH24": 5496,
  "labels": [],
  "pairCreatedAt": null,
  "retrievedAt": "2026-09-30T02:25:12.901Z"
}

🧾 Reading the output

recordType is not a safe filter on its own, because the free sample row says pair too.

charged: true is what tells a real row from a sample or diagnostic row. To keep only the data, filter on it, or drop every row carrying _sample or _diagnostic.

▶️ How to run it

1. Open DexScreener Pair Price & Liquidity Scraper and click Try for free. 2. Type into Search terms, or paste into Token addresses or Pair addresses, with the chain in front of each address. 3. Set Skip pools below this liquidity (USD) if you only want real markets. 4. Set Maximum rows, and keep it low while you are testing. 5. Click Start, then download the dataset as JSON, CSV or Excel, or read it from the API.

💰 How much does it cost?

$1.40 per 1,000 pairs, flat on every Apify plan: no volume tiers, no subscription. One hundred pairs come to 14 cents.

Not charged: the sample row, every diagnostic row, pools under your liquidity floor, a pool found twice, and an answer that did not match what you asked for. If you set a maximum charge for the run, it stops at the last row that fits.

💡 What people use it for

• Watching one token's pools across several chains and venues, to see where it actually trades and

where the price differs.

• Keeping a sheet of current prices and pool depth for a basket of tokens, refreshed on a schedule.
• Checking whether a token that looks liquid on a chart has any depth behind it. liquidityUsd next

to volumeH24 answers that at a glance.

• Pulling pairCreatedAt, early volume and starting liquidity for a list of new pools.

🚧 What it does not do

• No advice. No score, rating, signal or prediction anywhere in the output. Just the numbers.
• No live feed. A price can be up to a minute old; sourceAgeSeconds says how old. For

sub-second prices, use the trading venue's own feed.

• No history. No candles, no OHLC, no time series. Only the current snapshot and the change

percentages DexScreener publishes.

• No holders, wallets or individual trades.
• No second page. 30 pairs per search or token, whatever you set.
• No pools DexScreener does not list. Coverage is what DexScreener has.
• No protection from copycat symbols. Names and symbols are chosen by whoever deployed the

contract, and two tokens can share one. That is why every row carries the addresses.

🧭 Which crypto scraper do you need?

❓ Questions people ask

How fresh is the price? Between zero and about sixty seconds old. sourceAgeSeconds gives the exact age and snapshotAt the moment the figures were true.

What happens if my search matches nothing? You get one free NO_RESULTS row and the run carries on to your other targets. "Nothing there" is a different code from "could not look", so you can tell them apart.

Can I get every pool for a token instead of just the biggest? Yes. Turn on allPoolsPerToken. You get up to 30 pools per token and pay for each, which is why it is off by default.

Which chains work? Any that DexScreener lists, in the same run. Write the chain in front of each address and mix them freely.

Can I run it on a schedule? Yes. Nothing is kept between runs, so the same input on a schedule is safe. Join on pairAddress to compare one run with the last.

Is this financial advice? No. It returns published market data and nothing else.

🆘 If something breaks

Open the Issues tab on the actor page. Send the input and the run ID, and the errorCode rows usually show what went wrong.